Specialized Motherboard with 32Bits MCU It could preprocess 32 instructions, support baud rate as high as 921600, more powerful! ?The Most Advanced 32Bits Laser Engraver Firmware Ortur laser master firmware, smarter, faster, higher precision, and easier to use. ? Laser power range could be S0 - S1000, compared to 8bits desktop laser engravers, which only has S0 - S255, Artur Laser Master could control laser beam more accurately, could even use the high power laser unit to "draw" a picture on paper, that the 8bits high power laser engravers could not do. ? Engraving speed could be as high as 3000MM/Min. ( If do not consider the laser carving result, the velocity of movement could be as high as 1000MM/S ) ?Active Position Protection There is a G-sensor on the motherboard, if the machine detects unauthorized movement, the laser beam will stop. ?Laser Beam Safety Guard If your computer system is halted or the USB cable is disconnected, led to that the laser engraver stops moving, the laser beam will stop, to prevent fire. ?Exposure Duration Detection and Limitation If the laser engraver is under control, but users forget to operate and keep the laser beam working, extra safety will be cut off in case the motor stopped moving, to prevent fire. ? LaserGRBL ( free software ) supports Windows XP, 7, 8, 10. LaserGRBL is the most popular carving software in the world, could import different format images, could edit in PhotoShop, Inkscape, CAD, etc., and then connect to the engraver via laser LaserGRBL for engraving and cutting. ? LightBurn ( paid software, lightburnsoftware.com ) supports Windows, Mac OS, and Linux. It's the most popular paid carving software in the world, very easy to use. ? This laser engraver supports PWM mode. ? Pre-assembled parts, just need 10 - 20 minutes to install the machine. ? 400 x 430 mm large engraving area. ? Aluminum profile frame + structured cabling, solid structure, smooth operation, attractive appearance ? Synchronizing shaft mechanical structure, avoid out-sync on two Y rails, during full speed engraving.

SPECIFICATION:

Specification: ? Motherboard: 32 bits motherboard with 32 Bits MCU ? Firmware: Artur Laser Master Firmware ? OS of Upper Computer: Windows ( Working with LaserGRBL ), MAC OS and Linux ( Working with LightBurn ) ? Power of Laser Engraver: 36W, 12V 3A ? Electrical Power of Laser Module: 7W, 15W, 20W ? Wave Length: 445 ± 5nm ? Input Format: NC, BMP, JPG, PNG, DXF, etc. ? Carving Area: X: 400MM x Y: 430MM ? Carving Speed: 3000MM / Min and less ? Image size: No Limit ( The pixel accuracy could be adjusted freely, and the default is 300 pixels per inch, it's about 0.81um pixel precision )